DIY Fortune Cookie Baby Booties

Celebrate the good fortune of a newborn baby with a pair of adorable fortune-cookie-shaped booties!



  1. STEP 1

    Download, print, and cut out template. Also download the booties visual how-to (located in the materials field) for helpful pictures of the process. Select polar fleece in two contrasting colors and be sure that pieces are at least 13 inches long by 8 inches wide.

  2. STEP 2

    With pieces of fleece right sides together, use a marker to trace two copies of the canoe-shaped template directly onto the fabric. To create a right and left bootie, be sure that traced templates are mirror images of each other.

  3. STEP 3

    With fabric scissors, cut pattern from fabric, being sure to cut through both pieces of fleece at the same time.

  4. STEP 4

    On a sewing machine, sew pieces together, leaving a 1/8-inch seam allowance. Be sure to leave a 1-inch opening in seam.

  5. STEP 5

    Using your fingers or a chopstick, turn bootie right side out through the 1-inch seam opening. Sew seam opening closed.

  6. STEP 6

    Topstitch along the curved edge of the top of the canoe shape, 1/4 of an inch in from the edge. Do this for both booties.

  7. STEP 7

    To create soles of booties, first trace 2 copies of sole template onto smooth side of a piece of Jiffy Grip nonslip fabric. Sole patterns should be mirror image of each other. With fabric scissors, cut out soles.

  8. STEP 8

    Sew bias tape around entire edge of each sole.

  9. STEP 9

    To create fortune, print desired message on Tailor iron-on quick-fuse canvas and cut into 1/2-inch by 3-inch strip. Remove fusible backing from back of canvas and sew fortune into place. To determine correct placement, place each bootie piece with curved edge facing upward. For right bootie, fortune should be sewn to left corner of canoe shape, angling down to right. For left bootie, fortune should be sewn to right corner of canoe shape, angling down to left.

  10. STEP 10

    To assemble booties, start by placing sole on top of corresponding canoe-shaped piece, lining up center of bottom of canoe shape with center of narrower end of sole. The smooth side of the Jiffy Grip nonslip fabric should be against bootie fabric.

  11. STEP 11

    Starting at center point and moving fabric in clockwise direction, sew edge of sole to bottom edge of bootie until you reach end of edge.

  12. STEP 12

    Starting back at center point and moving fabric in counter-clockwise direction, sew remaining edge of sole to remaining edge of bootie, sewing through all layers of fabric, until you reach end of edge.

  13. STEP 13

    Repeat sewing process for second bootie.

The Martha Stewart Show, April 2011

comment (1)

  • avatar

    on July 02, 2015 23:01

    I am going to try this! These are so cute! Thanks again for sharing!

Leave a comment

Please note, comments must be approved before they are published